Go to New Version

News

New Glue Remover With High Efficiency

 
           
 
   
FEATURES
● Two molds for iPhone 5/5C/5S/6/6+/6S/6S+ LCD
● Apply molds to avoid LCD damage
● Easy to operate with the rolling driver and molds
● Suit for different types of LCD
● Remove the POL film/ LCD glue with no residual
● Low technical requirements
● Apply molds to improve efficiency
 
SPECIFICATIONS
 
  Size 40*26*30CM Voltage 110V/220V Power 800W  
  GW 4.5KG NW 3.95KG Working temperature 150℃-180℃  
 
     
  OPERATION WITH MOLD  
     
       
             
     STEP 1      STEP 2      STEP 3  
     Preheat the machine to 180      Place the mold with LCD on the plate      Lower the razor blade on the middle  
     centigrade and put the LCD in the            of the LCD  
     mold              
             
 
       
             
     STEP 4      STEP 5      STEP 6  
     Roll the driver to remove the glue      Turn to the other side      Remove the remaining glue  
     until the end of LCD              
             
     
  OPERATION WITHOUT MOLD  
     
       
             
     STEP 1      STEP 2      STEP 3  
     Preheat the machine to 180      Lower the razor blade on the top of the      Roll the driver to remove the glue,  
     centigrade and put the LCD on the      LCD. Notice that cut an open at the top      leave about 1mm residual for  
     plate directly      of LCD with razor blade would be better      manually removing  
             
 

Ordering Guide

FAQ Ordering By E-Catalog Shipment

Service Center

Recycling Solution Solution Center Partnership

Company Info

About US Contact US Testimonial

Policy Claim

Return Policy Copy Right Statement Privacy Protection

Contacts US

sales@rewatechnology.com info@rewatechnology.com
Copyright © 2008-2015 REWA Technology Co.,Limited. All Rights Reserved.