Go to New Version

News

iPhone 6 LCD To 6s LCD, Just 7 Steps

 

 

 
  PROCEDURE >  
 
       
STEP 1
Remove the glass and backlight from
iPhone 6 screen, with LCD display and
POL film remained.
 
     
 
       
STEP 2
Cut an opening at the middle of touch
digitizer flex , then disassemble the
two flex cables after heated.
 
     
 
       
STEP 3
Clean the adhesive residue by ACF
remover.
 
     
 
       
STEP 4
Stick the ACF glue on the flex cables
after cleaning, and compress it with
electric soldering station.
 
     
 
       
STEP 5
After the microscope lenses are set
to right place, align the 6s flex cables
with LCD. Use Pulse Flex Cable
Bonding Machine to bond the LCD
flex and touch digitizer flex to the LCD.
 
     
 
       
STEP 6
Write the 6s data to the LCD driver IC.
 
     
 
       
STEP 7
Use mother board plate and backlight
to test the 6s LCD. After testing,
replace the POL film if necessary.
 
     
 
Regarding to the controversy whether iPhone 6 LCD can be transferred to iPhone 6s LCD, REWA had a series of testing.
Actually, this technique has been bubbling up for quite a while, and some 6s LCD in the market are transferred from
iPhone 6 LCD. This kind of LCD is stable in quality at present. However, don't easily try this technology unless you are a
skilled operator, since flex bonding is difficult and complicated.
 
 

Ordering Guide

FAQ Ordering By E-Catalog Shipment

Service Center

Recycling Solution Solution Center Partnership

Company Info

About US Contact US Testimonial

Policy Claim

Return Policy Copy Right Statement Privacy Protection

Contacts US

sales@rewatechnology.com info@rewatechnology.com
Copyright © 2008-2015 REWA Technology Co.,Limited. All Rights Reserved.